Copyright
©
2017
congatec
AG
MA50m17
39/60
7.2
ACPI Suspend Modes and Resume Events
conga-MA5 supports S3 (STR= Suspend to RAM). For more information about S3 wake events see section 10.4.8 “ACPI Configuration Submenu”.
S4 (Suspend to Disk) is not supported by the BIOS (S4_BIOS) but it is supported by the following operating systems (S4_OS= Hibernate):
•
Windows
®
10 and Linux
This table lists the “Wake Events” that resume the system from S3 unless otherwise stated in the “Conditions/Remarks” column:
Table 12
Wake Events resuming system from S3
Wake Event
Conditions/Remarks
Power Button
Wakes unconditionally from S3-S5.
Onboard LAN Event
Device driver must be configured for Wake On LAN support.
PCI Express WAKE#
Wakes unconditionally from S3-S5.
PME#
Activate the wake up capabilities of a PCI device using Windows Device Manager configuration options for this device OR set Resume On
PME# to Enabled in the Power setup menu.
USB Mouse/Keyboard Event
When Standby mode is set to S3, USB Hardware must be powered by standby power source.
Set USB Device Wakeup from S3/S4 to ENABLED in the ACPI setup menu (if setup node is available in BIOS setup program).
In Device Manager look for the keyboard/mouse devices. Go to the Power Management tab and check ‘Allow this device to bring the
computer out of standby'.
RTC Alarm
Activate and configure Resume On RTC Alarm in the Power setup menu. Only available in S5.
Watchdog Power Button Event
Wakes unconditionally from S3-S5.
