Mount the mounting bracket onto outlet
box by the 2 srews, spring washers and
flat washers.(Using explosion screws(not
provided) for concrete).
Page3
Connect the 3-head and 4-head snap
button respectively.
15. Mounting
plate
3. Male/Female Connectors
Hang the ball joint and the fan onto the
bracket. Make sure the guide pin of
bracket is fitted into slot of ball joint.
8. Canopy
16. Ball Joint
2. Terminal Block
Insert the remote control receiver
between the bracket and the downrod,
and the sensor as shown.
4. Remote
Control Receiver
1
2
Cable connection
