5
Pressing the Menu key will pop up the attribute box. In this box, the user can
select to adjust either position or size of the area. After selection, the arrows will
then adjust the attribute.
Color Palette
Pressing the left or right arrows will scroll through the available color palettes,
displaying their name above the palette. The selected palette will become active
after about 3 seconds of selecting it and will be set as the default power on
palette.
Level/Span values
Pressing the left or right arrow will reduce or increase the Span and pressing
the up or down arrow will reduce or increase the Level. If the unit is in Automatic
mode, modifying any of these parameters will select Manual mode.
b
)
The second function performed is to force an internal calibration cycle.
This is performed by pressing and holding the
A
key for 5 seconds or more. The
camera will make automatic correction to get the most accurate thermal
measurement.
3 - Cancel/Camera key (Marked “C”)
Pressing and releasing the
C
key cancels the present operation when in M
enu
mode.
Pressing and releasing the
C
key when an image is frozen or being viewed
from memory, will return to real-time measurement status.
When a parameter is selected, such as a measurement cursor, pressing the
C
key will delete the highlighted measurement.
4 - Freeze/Save key (Marked “S”)
Used for freezing or saving thermal image. Press the key once to freeze the
image. Press Confirm to save the image or Press C to return to real-time
measurement.
5 - Menu/Confirm key (bar)
Includes
Up
,
Down
,
Left
,
Right
and
Menu/Confirm
(center) keys. Function
varies with operation mode.
In
Menu mode
, it is used for menu selection.
Up
and
Down
keys are for same
level of menu operation.
Left
and
Right
keys are for different levels menu
operation.
Confirm
key (center) is to activate the menu and confirm the choice.
In
Image mode
, press
Up
or
Down
key to activate X2 digital zoom. The
screen will display “X2” in the upper left corner. Press
Up
or
Down
key to return
to the original image.
In
Spot Measurement
editing mode (activated immediately after adding a
spot or by selecting via the
A
key), press the
Menu
key to pop up the attribute box.
Press four navigation keys to move the spot location.
In area measurement editing mode (activated immediately after adding an
area or by selecting via the
A
key), press the
Confirm
key to pop up the attribute
box. Select in the attribute box the parameter to be edited, either size or position.
Press the four navigation keys to move the area location or change the size of the
area.
6 - Trigger/Shortcut key
The trigger key serves as a shortcut to access the following functions:
Spot– Pulling and releasing trigger adds a spot. Pulling and releasing trigger
again removes the spot.
Area –Pulling and releasing trigger adds an area. Pulling and releasing trigger
again removes the area.
Save – the same with “S” key, pressing to initiate a Save cycle.
Содержание IR-CAM4
Страница 20: ...20...