CONDTROL IR-CAM4, Руководство пользователя

Страница: 15 / 20

15
6.4.4.4. Delete
Used for deleting the image. When camera is in image replay mode, press
Menu key to activate the main menu, select File->Delete, press Confirm key to
pop out the below prompt box. Press Confirm key to delete the current opened
image.Press C key to cancel the deletion.
CAUTION: Before deleting, make sure the file is not needed or already backed up.
Files cannot be recovered after deletion.
6.4.4.5. Format
Format is used for formatting the TF card. Press Menu key to activate the
main menu. Select File->Format and press Confirm key to pop up the below dialog
box. Press Confirm key to do format; press C key to cancel the format.
CAUTION: Before formatting, make sure all files are not needed or already
backed up. Data cannot be recovered after formatting. If formatting via PC,
please use FAT16 format.
7. OPERATION
7.1. Capture an image

After installing the battery, press and hold the power key (≥3 seconds)
until the display comes on. After approximately 50 seconds, the power
on routine will finish and the camera will start its measurements.

Remove the lens cap and aim at the target. Adjust the focus for the
clearest target thermal image.
! NOTE : Failure to properly focus the camera will result in increased
measurement error. When the image quality become worse or ghost
image appeared, please press button A for a long time to compulsion in
force.
7.2. Temperature measurement

If no measurement cursors are on screen, add a measurement spot, area
by pressing
MENU and selecting Measurement. Press CONFIRM and
scroll left or right to select the proper measurement parameter. Aim the
cursor indicator onto the target object on the screen. The temperature
will be displayed in the upper right corner of the screen. For highest
accuracy measurements, force a calibration cycle by pressing the
A key
for 5 seconds until “ Calibrating ” appears in upper left portion of display.

If you want to measure the current thermal image in detail, press S key
to freeze the image for on-screen analysis. Save the image if future
analysis is desired. For details, see Section 4.

If the target object’s temperature is lower or higher than the limits of the