background image

18

Flying Tips & Features

Tips for Safe Operation

•  It is recommended to only fly in large, open spaces that are free of obstacles like 

power lines, trees, ceiling fans, etc.

•  When flying indoors, avoid walls and ceilings, as the craft will be drawn towards them 

if closer than 2-3 feet.

•  Stand behind the craft when first taking off, so that you and the craft are facing the 

same “forward” direction. This will help with orientation when the craft is airborne. 

•  Novice pilots should move the controls slowly and deliberately to get used to the 

craft’s flying characteristics. Try using one control at a time. 

•  Practice basic flight operations like take off, hovering, and landing.
• 

Remember: To quickly stop the motors, pull both thumbsticks down and outwards.

 

•  If you crash, power down IMMEDIATELY to reduce the chance of damage or injury. 
•  If anything obstructs the propellers for any reason, power down IMMEDIATELY and 

safely clear the obstruction. Check for possible damage before flying again. 

Speed Setting

Press the 

Speed button

 on the remote control once to set the craft’s speed. The remote will 

chime to indicate the speed setting.

• 

Low:

 Provides smooth and predictable control of the craft. 

• 

Medium:

 The craft will move and respond faster to all control inputs. 

• 

High:

 Highest setting for maximum performance.

Altitude Hold/Hover

The Condor Pro automatically holds its altitude by maintaining a “half-way” position for 
the 

Left Control Stick (throttle).

 This can be useful for flying and operating the camera 

controls at the same time. 

Note: The craft will may shift in altitude within a range of approximately 8-12 inches. 
Bear this in mind while flying and performing precise maneuvers. 

Auto-Reverse

To enable Auto-Reverse, press down (into the body of the remote) on the 

Right Control 

Stick.

 The remote will emit a chime and the craft will begin flying in the reverse of the 

direction it was originally flying. Note that the throttle control functions normally and any 
directional change from the 

Right Control Stick

 will disable Auto-Reverse.

Содержание DRW876





























Отзывы: