Copyright © 2013, Condor Instruments Ltda.
18
Av. Brigadeiro Luis Antonio, 551, cj 124 - Cep:01318-000
As the message explains, this process may take a few seconds to complete
(it depends on the database size), and you need to wait until it finishes.
Note
: this option should be used when you have some disabled logs that you
want to permanently delete. If you want to permanently delete only one or two
logs use the single delete option provided by the quick actions menu.
EDITING DATABASE LOG
When you select a log from the database through the Log List page the log
information will be shown in the right upper corner of the ActStudio, and it
means that you are editing an existing log.
You can edit the log data by changing the period selection, log selection, time
zone, sleep diary and sticky notes. When you finish the edition, you can click
on the "
Save to Database
" button.
Here we have two options:
1. If you are editing an "
Original
" log it will insert a new log with the "
Log
Type
" "
Edited
", then the selected log (and log information) will be
changed to this new log. It means that now you are editing this new log
(the "
Edited
" log).
2. If you are editing an "
Edited
" log you will see the following message:
Here you can choose one of the following options:
Save as a new log
: it will insert the current data log as a new
log into the database and will change the selected log to this
new one.
Override the current log
: it will override the current log data.
Be careful to not override important information.
Cancel
: it will only cancel the operation and will not save the log
into the database.
