Condec UPS3000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 94

1
About This Manual
The bench-top UPS3000 and the rack-mountable UPS3110 and UPS3210 pneumatic pressure standards are
rugged, compact instruments manufactured by CONDEC. They are designed to provide superior accuracy, range
of calibration and ease of operation when used to assist in the manufacture, test and/or calibration of a wide
variety of pressure sensing and measuring devices.
These instruments utilize an extremely repeatable sensor coupled to microprocessor-based electronic circuitry
and a selectable units display system. This provides easily readable and accurate digital representation of the
measured pressure. If required for portable use, the optional battery models, are able to provide up to six hours of
use.
The UPS3110 all electro-mechanical device has our precision Orion vernier and one test port. Some models
contain a front panel gage, to show the operator the input pressure, as well as, a pressure regulator that will act as
a pressure limiter so that the operator can not over pressure a unit under test. A test hose is supplied for the
customer. Standard front panel buttons and switches provide selection of the desired pressure range, push-button
zeroing and the unique internal self-check feature.
This manual has been written to give the user a simple and clear explanation of how to operate, calibrate and
maintain these instruments.
Before attempting to use either style, Pressure Standard, the following instructions
must be carefully read and understood by personnel utilizing the equipment. This is a
high-pressure system. While a substantial effort has been expended to make this
equipment safe, simple and fool-proof to operate, it is strongly recommended that only
personnel formally trained in the use of pneumatic pressure equipment be permitted to
operate it. Potentially dangerous conditions could be produced through negligent
handling or operation of the console due to the high pressure contained within the unit.
UPS3110 units are strictly for use with pneumatic pressures. Erroneous readings and
potential damage could result from the introduction of hydraulic fluids into the internal
tubing lines.
Authorized distributors and their
employees can view or download this
manual from the Condec distributor
site at
www.4condec.com
.
#AUTION