Condari BAL, Руководство по установке, Страница: 7 / 24

7
Condor Rangehood Installation Instructions
11. Fit stainless flue to top of hood with 4 supplied fixing screws while hood is on ground to
avoid having to drop stainless flue down through hole in the ceiling and causing possible
damage to the flue. (If using shroud it can be fitted either at this stage or carefully after
hood is on wall)
12. Remove fans if needed and lift hood up onto mounting bracket carefully guiding flue
through hole in ceiling and bringing power cable into hood during this process. You will
require up to 3 people for this lifting stage as hood is quite awkward and heavy to lift.
13. Screw or bolt hood to wall securely making sure hood is level and sitting properly on
mounting bracket. It is advisable to have portable stands ready for this stage as hood will
get quite heavy.
14. Refit perforated panel in the rear or the hood and refit fans if they have been removed.
15. Make electrical connection to junction box inside bottom right side of hood.
16. Extend ducting through roof to exterior and fit roof cowl making sure to seal roof
penetration with preferred flashing material. (Note: there are several on the market to suit
the type of roof you have, so consult your plumber for the best product to suit)