Condari BAL, Руководство по установке, Страница: 5 / 24

5
Condor Rangehood Installation Instructions
be discharged into any chimney or flue, which may carry combustible products from other sources.
a) Do not discharge the air-flow from the rangehood into a flue used for exhausting fumes
from burning gas or fuel;
b) A reduction in ducting size will result in the motors eventually failing and will need replacement.
c) For cleaning purposes please refer to page 20 of installation instructions for stainless steel;
d) If cleaning is not carried out in accordance with the instructions as listed on page 20, you
may have an increased risk of fire;
e) Accessible parts of the rangehood may become hot when used with cooking appliances;
f) This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
7. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it.
8. NOTE : CONDOR recommend minimum air movement of 2000 cubic metres per hour and recomment up to
2700 cubic metres per hour over a barbecue, depending on the length of the duct run. Barbecues should be
positioned under the centre of the hood where the fans are mounted and not near the outer edges where
leakage may occur. Please also note barbecue lid position, as if it does not open to a 90 degree angle the
smoke and by-products can be diverted forward and away from the rangehood catchemt area.
9. The lights in the rangehoods are LED.
10. To reduce the risk of fixing screws coming in contact with live parts, do not drill or screw into the rangehood.
Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and
only through single sheet material.
11. CONDARI PTY LTD can manufacture rangehoods to be used over commercial cookers in domestic
applications.
NOTE: Installation must comply with local State & Council regulations.