Condari BAL, Руководство по установке, Страница: 4 / 24

4
Condor Rangehood Installation Instructions
CONDARI PTY LTD makes over 120 different models of QASAIR and CONDOR Rangehoods plus many
specials designed by architects and interior designers.
It is important to follow the installation instructions for different models.
The following is general advice for the installation of CONDOR Rangehoods and is meant as a guide.
Firstly, there are many different cooking appliances on the market today and we list some here.
Electric Eco, Ceramic hotplates, Teppanyaki plates and Induction hotplates, which need special cooking
equipment. There are gas hotplates with four burners and a wok burner or fish burner of all different heat output.
Many companies offer a vario system with individual two gas burners, a wok burner, electric ceramic hotplate, an
electric griller or barbecue and an induction hotplate. There are three gas cooking appliances with an open flame
griller or barbecue.
Gas regulations require different heights for different brands of hoods. CONDOR hoods can be fitted between
1000 mm to 1400 mm above the barbecue. This is due to the fact they do not have plastic motors.
1. The installation of CONDOR Rangehoods must comply with the information in this booklet. CONDOR
Rangehoods are designed and made to work efficiently over all domestic cookware available on the
Australian market.
2. Every CONDOR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or
non-porous and non-flammable materials. We do not recommend the use of any type of flexible ducting
or plastic PVC piping (barbecue heat output will affect flexible ducting and cause it to desintegrate) .
Rangehoods must not be vented into a wall cavity or a ceiling space. This prevents a build up of grease,
which can be a fire risk. Ensure the external outlet vent does not restrict the airflow in any way, as this may
result in reduced performance.
3. CONDOR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood
ie: The cross sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the
duct size or have sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from
CONDOR is available to ensure optimum performance. Always use nonflammable materials to minimise the
risk of fire in the duct at a later date.
4. Ensure all ducting pieces are correctly fitted and sealed with either duct tape or silicone to ensure that fumes
do not escape into the ceiling space and seep into living areas through vents or light fittings. The installation
and fitting of the rangehood should be done in such a way that will allow the unit to be removed if service is
required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not covered
by warranty.
5. Always adequately ventilate the room when the rangehood is in use at the same time as appliances burning
gas or other fuels.
6. WARNING: Incorrect venting will result in additional noise and a reduction in efficiency. Exhaust air must not
IMPORTANT INFORMATION