4
Nortec RS Steam Humidifier
2596995_0_EN_1905
Nortec RS
1.3
Options
lists the options available for the Nortec RS humidifier. Detailed installation instructions are sup-
plied with each option.
Table 2: Nortec RS Options
Option
Availability
Description
Factory
Installed
Field Install
Kit
Built-on blower pack
A blower pack is used to distribute steam generated by
the humidifier directly into a conditioned environment. The
Nortec RS Space model comes with a factory-installed
blower pack and internal steam and condensate connec-
tions. A remote-mounted blower pack is also available. Refer
Scale Management
Provides a separate reservoir underneath the steam cylinder
for scale collection. The addition of this option reduces main-
tenance time significantly. Minerals removed from the water
during steam production will collect in the scale reservoir
rather than in the tank, away from the heating elements and
drain pump. When minor maintenance is needed, the scale
tank is easily removed and emptied in minutes.
High Precision
Provides capability of humidifier to a/- 1% steam
output. Solid State Relays allow for rapid response upon
call for humidity, adapting instantly to humidity demand.
This allows for quick response and tight control of humidity.
Also supplied are two fill valves for quicker response (turbo
mode).
Mounting bar
Provides two mounting bars which fit into each other for
wall mounting. One bar is fastened to the humidifier, and
the other bar is fastened to the wall. The unit can be hung
onto the wall by engaging the two mounting bars.
Note:
The
unit can also be wall-mounted (without this option) using the
keyhole cutouts on the back of the humidifier housing.
Mounting rack
Stand-alone rack for mounting the Nortec RS humidifier.
Remote fault indication board
Printed circuit board (PCB) with relay contacts for connect-
ing remote status displays for “Unit On”, “Steam”, “Error” and
"Remote Fault Indication Board" on page 46
.
Accessory board
PCB with relay contacts for connecting other accessories
such as fans and supply water flushing valves. Refer to
.
Factory-configured control
settings
The humidifier can be factory-configured for the requested
control signal acceptances. The humidifier can also be
reconfigured in the field, as needed. Refer to
for standard part numbers.
Fill cup extension
Kit for extending the fill cup so the humidifier can accommo-
date backpressure up to 10 in H20 (2.49 kPa).
BTL-certified BACnet MS/TP
digital communications
PCB to provide BTL-certified BACnet MS/TP connectivity.
BTL-certified BACnet IP
digital communications
PCB to provide BTL-certified BACnet IP connectivity.
LonWorks digital communica-
tions
Supplementary board to provide LonWorks connectivity.