57
Product Selection
Nortec RS
2596995_0_EN_1905
Select control accessories, as required, for automated regulation of the humidifier. Refer to
for details of the control system, and
for details of accessories and
part numbers.
Control Accessories
Part Number
Air proving switch
Duct-mounted outdoor temperature setback sensor
Exterior-mounted outdoor temperature setback sensor
Plug-in transformer, 120 VAC to 24 VAC
Control humidistat (refer to
for part numbers)
High limit humidistat (refer to
for part numbers)
Select a digital communications protocol, if required, for interfacing the Nortec RS humidifier with build-
ing automation systems. Refer to
"Digital Control Signals" on page 41
or BACnet/LonWorks Supplemental
manual (Condair document 2585293) for details.
Digital Communications Protocol
Part Number
BACnet IP, BACnet MS/TP
Standard
Modbus
Standard
Condair Online
Standard
BTL-certified BACnet MS/TP
BAC-BTL-MSTP
BTL-certified BACnet IP
BAC-BTL-IP
LonWorks
LON
6.2
Steam Distribution Equipment
Select a steam distributor that exceeds the production capacity of the humidifier(s), fits the duct/air han-
dler size (if applicable), and accomodates the steam outlet connection to the humidifier. Refer to
for available methods.
If a SAM-e is required, refer to the SAM-e Engineering Manual (Condair document 1503529) for selec-
tion information and part numbers, then make the appropriate selections below.
SAM-e Configuration
Quantity
Part Number
Steam inlet adaptor
–
SAM-e header
–
Steam tubes
Insulation (improves energy efficiency by as much as 70%)
–
Mounting Frame (required for vertical duct installation)
–