6
For Your Safety
2596151-C_EN_2010_Condair GS EGMS_IOM
Dangers that may arise from the Condair GS gas-fired steam air humidifier
DANGER!
Risk of fire or explosion!
The Condair GS works with gas. Incorrectly performed installations, improper operation and
maintenance, incorrect settings and unauthorised modifications to the equipment may lead
to personal injury or damage to property due to explosions, fires, carbon dioxide poisoning,
electric shocks etc.
Therefore:
Only trained, qualified specialists authorised by the operating company may work on the
gas system. Before starting work on the gas system, shut the Condair GS down in accordance with
the instructions in the installation and operating instructions for the Condair GS (turn the machine off,
unplug it and turn off the water and gas supply) and ensure that it cannot be turned on again accidentally.
Do not store or use any inflammable substances in the vicinity of the Condair GS.
What to do if you smell gas:
•
DO NOT try to light any appliance.
•
DO NOT touch any electrical switch.
•
DO NOT use any phone in the building.
•
Leave the building immediately.
•
Call your gas supplier immediately from a location far away from the building with the gas
leak. Follow the gas supplier's instructions. If you cannot reach your gas supplier, call the
fire department.
DANGER!
Risk of electric shock!
The Condair GS is mains powered. Live parts can be touched if the machine is open. Touching
live parts may lead to serious injuries or death.
Therefore:
Before starting work on the Condair GS, shut it down in accordance with the instructions
in the operation manual for the Condair GS (turn the unit off, disconnect it from the mains supply and
turn off the water and gas supply) and ensure that it cannot be turned on again accidentally.
WARNING!
Risk of severe burns from contact with hot surfaces!
The water tank, the steam pipes and the exhaust gas system get very hot when they are operat-
ing. There is the risk of burns if you touch these components while the machine is operating
or shortly afterwards.
Therefore:
Do not touch the water tank, the steam pipes and the exhaust gas system while they are
operational. Before starting work on the Condair GS, shut it down in accordance with the instructions
in the operation manual for the Condair GS (turn the machine off, disconnect it from the mains supply
and turn off the water and gas supply) and ensure that it cannot be turned on again accidentally. Then
wait until the components have cooled sufficiently so that there is no longer a risk of burns.
