Condair DC 100-R, Инструкция по установке и эксплуатации

Страница: 19 / 52

Rev. A 09-2017
19
DC
,QGXVWULDO'HKXPLGL¿HUV
Packaging could be dangerous for the operators.
The packaging materials should be seperated and sent for disposal or possible recycling to specialist waste
companies.
4.4 Inspection
:KHQLQVWDOOLQJRUVHUYLFLQJWKHXQLWLWLVQHFHVVDU\WRVWULFWO\IROORZWKHUXOHVUHSRUWHGRQWKLVPDQXDOWRFRQIRUPWRDOOWKHVSHFL¿FDWLRQV
of the labels on the unit, and to take any possible precautions of the case. Not observing the rules reported on this manual can create
dangerous situations. After receiving the unit, immediately check its integrity. The unit left the factory in perfect conditions; any eventual
damage must be questioned to the carrier and recorded on the Delivery Note before it is signed. The company must be informed, within
8 days, of the extent of the damage. The Customer should prepare a written statement of any severe damage.
Before accepting the unit check:
• The unit did not suffer any damage during transport;
• The delivered goods are conforming to what shown in the delivery note.
,Q&DVHRI'DPDJH
• List the damage on the delivery note
• Inform the Company of the extent of the damage within 8 days of receipt of the goods. After this time any claim will not be considered.
• A full written report is required for cases of severe damage.
6WRUDJH
Units should be stored under cover and ideally, should remain in their packaging. The tools that are supplied for opening the electrics box
should be formally transferred to the person responsible for the plant.
8QSDFNLQJ
It is advisable to leave packaged units during handling and remove it before the installation.
The packaging must be removed carefully to prevent any possible damage to the machine.
The materials constituting the packaging may be different in nature (wood, cardboard, nylon, etc.).
When unloading the unit, it is strongly recommended that sudden movements are avoided in order to protect the refrigerant circuit, copper
tubes or any other unit component. Units can be lifted by using a forklift or, alternatively, using belts. Take care that the method of lifting does
not damage the side panels or the cover. It is important to keep the unit vertical at all time to avoid damage to the internal components.
/LIWLQJDQGKDQGOLQJ