Concoa INTELLISWITCH, Инструкция по установке и эксплуатации

Страница: 15 / 24

14 15
Table 7 — Remote Alarm Pin Assignments
IntelliSwitch
Pin Number
529-5106 Alarm
Pin Number
529-5310 Alarm
Pin Number
Function
1 1 14 Left Alarm Status
2 — — N.C.
3 3 3 +12v (provided by the remote alarm)
4 4 15 Right Alarm Status
5 — — N.C.
6 6 16 Ground (provided by the remote alarm)
If the IntelliSwitch is being connected to a 529-5106 Alarm, the pin connectors and procedure for the Alarm
side of the cable are the same as described above. If the IntelliSwitch is being connected to a 529-5310 or
5295311 Alarm follow the instructions below.
Using the pin assignments shown in Table 7 and the connector views in Figure 6 and Figure 7, solder the
wires to the appropriate pins. After soldering is complete, attach the connector cover to the 25 pin connector.
Insert the small screws that come with the connector into the holes on the ears of the connector so that the
heads of the screws face the wire side of the connector. Slide the retainer clips onto the ears of the connector
to capture the screws.
Note: The pin outs shown for the 25-pin connector assume connection to channel 1 of the Alarm. Refer to the
appropriate Alarm documentation for connections other than channel 1.
Figure 6
Figure 7
Rear View of 25-pin connector.
View is from the wire side of the connector