Concoa Advantium 16, Инструкция по установке и эксплуатации, Страница: 20 / 28

18
INPUT GROUPS PAGE
The Advantium 16 Input Groups page shows the current configuration for Input groups.
Each row represents the configuration for the Input Group of that number. The settings
may be changed by clicking the appropriate check box and clicking the set button. The
cancel button will restore the current settings if any have been made in the browser but
not committed.
If ALL of the enabled members of an input group enter an alarm condition, then the
multi-color LED for each input will blink red. Input groups may also be referenced in the
configuration of output relays. To be used, an input group must have at least one
member.
If an input group is disabled, none of the multi-color LEDs for member inputs will blink
red when all enter alarm condition. Additionally, if the input group is referenced for an
output event, it (and all members) will be ignored. Please note, however, that disabling an
input group does not disable input group members. Inputs may only be disabled on the
Inputs configuration page.
The name of the input group is used on the status page of this website and in any e-mails
generated.
A group would typically be created for each continuous gas delivery system. For
example, a group entitled "Carbon Dioxide Switchover" might contain a "Right Side"
input and "Left Side" input.
Figure 17