Concoa Advantium 16, Инструкция по установке и эксплуатации, Страница: 19 / 28

17
INPUTS PAGE
The Advantium 16 Inputs page shows the current settings for each of the sixteen system
inputs. The settings may be changed by entering the appropriate value in the text box,
selecting the appropriate value from the drop-down box, or by clicking the appropriate
check box and clicking the set button. The cancel button will restore the current settings
if any have been made in the browser but not committed.
If an input is enabled, the status of that input will be shown on the alarm panel, reported
on the status page, used for output relays and reported in email events. If an input is
disabled, it will be ignored and the LED will be turned off.
The name of the input is used on the status page and in any generated emails.
The normal condition of the input indicates the expected circuit continuity of the input.
When an input is in normal condition, its associated LED (on the front panel and status
page) will show green. When the input exits its normal condition the indicator will show
red. All inputs are configured at the factory for normally closed operation.
If all the inputs in an enabled group exit normal condition, the multi-color LED on the
alarm panel will blink red. Each inputs may be a member of only one group and may be a
member of no group, in which case its multi-color LED will never blink red. (See the
Input Groups settings page for more information.)
Figure 16