Copyright
®
2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 4 of 7
Step 3: Recording from TVDVB-T
When all cable connections have been made turn on your CM3G/P/PP and your TVDVB-T. The menu of the
CM3G/P/PP will be shown on your TV. If this is not the case, refer to chapter seven (“First-Time
Configuration”) of the CM3G/P/PP manual.
There are two methods to record from a digital TV tuner. The first one is to start recording instantly and the
second one is a scheduled recording.
Instant recording (One Touch Record)
1.
Turn on your TVDVB-T. Press the ‘
SOURCE
’ button twice on the CM3G/P/PP its remote control to select
“
Video 1”
video input. If your TVDVB-T is turned on then you will be able to watch digital channels
through the CM3G/P/PP.
2.
Use the TVDVB-T remote control to select the (digital) channel from which you want to start recording.
3.
Press the red ‘
RECORD
’ button on the remote control of the CM3G/P/PP to start recording instantly.
4.
To stop recording, press the ‘
STOP
’ button on the remote control of the CM3G/P/PP.
Note
:
Do not turn off the CM3PVR or TVDVB-T during the recording. Also do not press
any buttons on either of the remote controls or devices itself. Doing so might result in an
incomplete recording.
