Copyright
®
2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 7
This how to document describes how you can connect and use your CM3G/P/PP to record digital channels
from a TV with an embedded DVB-T tuner (within this document this will be mentioned as a TVDVB-T).
ATTENTION:
This feature can only be used in certain TV models, not all TV models will allow you to
record from a embedded DVB-T tuner. Please check your TVs manufacturer manual if this is possible.
Important
As mentioned before not all TVs with embedded DVB-T tuner have the required connections to let the
CM3G/P/PP record digital channels.
It is mandatory that your TV has some kind of video output to let the CM3G/P/PP record digital channels.
It could be that the video output from the TV only allows an analog tuner signal instead of DVB-T. Then
please check with the TVs manufacturer to do a correct configuration.
It should be mentioned in your TVs manufacturer manual if your TV has a video output available.
Follow the steps as seen below to watch and record digital channels from a TV embedded DVB-T tuner with
your CM3G/P/PP.
Step 1: Connecting TVDVB-T to the Conceptronic CM3G/P/PP
We will use a composite cable (yellow, white, red) and the RCA to SCART adaptor. These cables are included
with your CM3G/P/PP.
