Concept2 VP9241, Руководство по эксплуатации

Страница: 29 / 40

27 VP9241
EN
OPERATING INSTRUCTIONS - ASSEMBLING THE VACUUM
CLEANER
NOTE:
Before fi xing or removing accessories, always pull the plug from the electric voltage
outlet!
1. Connecting the fl exible hose to the appliance
Insert the fl exible hose into the appliance‘s air suction inlet (Fig.1).
Push until your hear a clicking sound indicating the right position has been reached.
For removing the fl exible hose, press both stopper buttons and remove the hose.
The suction power can be manually controlled on the hose handle by a slide throttle.
When the slide throttle is closed, the air fl ow is stronger.
When the slide throttle is open, the air fl ow is weaker.
2. Attaching the telescopic tube to the hose adapter
Pull the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the fl oor attachment to the telescopic tube
Insert the telescopic tube into the fl oor attachment and turn it slightly.
The clapper (Fig. 2) is used for setting the fl oor attachment to brushing (for fl at
fl oors), or to smooth vacuum cleaning (for carpets).
ACCESSORIES
1. Slot nozzle
The slot nozzle adapter is used for vacuum cleaning the places accessible with diffi
culty, such as radiators, slots,
corners, pedestals, spaces between upholsteries, and others.
2. Nozzle with a brush
This nozzle is designed for furniture, upholstery, books, lamps, and others.
3. Upholstery nozzle
This upholstery nozzle attachment is used for smaller upholstery areas.
4. Brush for wooden fl oors (depending on the vacuum cleaner type)
This brush is made of hair bristles and is designed for vacuuming wooden and sprung fl oors.
APPLIANCE USE
NOTE
Before using the appliance, make sure the fi lters and the dust retention bag are properly fi xed. Unwind the supply cable
length you need. The yellow mark on the power supply cable indicates the optimum cable length. Do not unwind the
power supply cable beyond the red mark!
1. Insert the plug into the electric voltage outlet.
2. Press the ON/OFF switch on the appliance.
3. Set up the suction power you need using the slide throttle.
4. After you have stopped vacuum cleaning, switch the appliance off and disconnect it from the electric voltage outlet.
5. For winding the supply cable up, press the wind button with one hand and hold the supply cable with the other hand
to avoid its uncontrolled movement.
Fig. 1
Fig. 2