29
VP9182
EN
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet filter. You can clean the filter by tapping it. If the filter is
heavily soiled, you may wash it in lukewarm water and let it dry properly.
3. Insert the cleaned or new air outlet filter into the appliance and close the air
outlet grid.
It is important
to let the wet parts dry thoroughly.
A wet filter will be
damaged by vacuuming!
Do not use a hair dryer to dry it!
TROUBLESHOOTING
Problem
Cause
Solution
Motor does not run.
Plug inserted into the mains outlet
incorrectly or insufficiently.
Check the plug connection.
The mains outlet is not live.
Check for voltage, e.g. by connecting
another appliance.
Motor has stopped
operating.
Improper or insufficient air flow. Motor
overheating fuse activated.
Disconnect the cable from the socket.
Check and release the air suction
and discharge holes; check the filter’s
cleanliness and/or replace the dust bag.
Let the vacuum cleaner cool down.
Front cover cannot be
closed
Dust bag inserted incorrectly.
Check the dust filter installation.
Reduced suction power
Dust bag full or clogged.
Replace the dust bag.
Obstructed filter.
Clean or replace the filter.
Clogged nozzle, tube, or hose.
Check and clear the air passage on the
suction and discharge sides.
Vacuum cleaner heats up
Slight heating of the vacuum cleaner is normal and cannot be considered a failure.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor filters) Order code sms9000
Priced according to the valid price list
Fabric dust bag, 1
Ord. No. ts9180
Price according to the applicable price list
Motor filter
Order code44290910 Price according to the valid price list
Air outlet filter
Order code 44290912 Priced according to the valid price list
(Fig. 5)
