Concept2 VP9182, Руководство по эксплуатации

Страница: 29 / 40

27 VP9182
EN
ACCESSORIES
1. Slot nozzle
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and others.
2. Upholstery nozzle
This upholstery nozzle attachment may be used for smaller upholstered areas.
USING THE APLIANCE
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
not unwind the supply cable beyond the red mark!
1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch on the appliance.
3. Set up the suction power you need using the output power control.
4. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage outlet.
5. For winding up the supply cable, press the winding button with one hand and hold the supply cable with the other
hand to avoid uncontrolled movement.
OPERATING MANUAL – ASSEMBLY OF THE VACUUM CLEANER
NOTE
Before fixing or removing accessories, always pull the plug out of the electrical socket!
1. Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance‘s air suction inlet.
Continue pushing until you hear a clicking sound, which indicates that the correct
position has been reached.
For removing the flexible hose, press both stopper buttons and remove the hose
(Fig. 1).
The suction power may be controlled manually on the hose handle.
When the slide throttle is closed, the air flow is stronger.
Slide throttle in open position - weaker air flow.
2. Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly.
The flap (Fig. 2) is used for setting the floor attachment to brushing (for smooth
floors), or to smooth vacuuming (for carpets).
(Fig. 1)
(Fig. 2)