29
VP9171
EN
Note:
Do not use a washing machine for washing the filter. Do not use a hair
dryer for drying the filter!
4. Insert the cleaned or new motor filter into the appliance and close its cover.
AIR INLET FILTER CLEANING AND REPLACEMENT
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet filter. You can clean the filter by tapping and shaking. If
full of dirt, you can wash the filter in lukewarm water and let it dry properly.
Note:
Do not use a washing machine for washing the filter. Do not use a hair
dryer for drying the filter!
3. Insert the cleaned or new air outlet filter into the appliance and close the air
outlet grid.
TROUBLESHOOTING
Problem
Cause
Solution
Motor does not run.
Plug inserted into the mains outlet
incorrectly or insufficiently.
Check the plug connection.
The mains outlet is not live.
Check for voltage, e.g. by connecting
another appliance.
Motor has stopped
operating.
Improper or insufficient air flow. Motor
overheating fuse activated.
Disconnect the cable from the socket.
Check and release the air suction
and discharge holes; check the filter’s
cleanliness and/or replace the dust bag.
Let the vacuum cleaner cool down.
Front cover cannot be
closed
Dust bag inserted incorrectly.
Check the dust filter installation.
Reduced suction power
Dust bag full or clogged.
Replace the dust bag.
Obstructed filter.
Clean or replace the filter.
Clogged nozzle, tube, or hose.
Check and clear the air passage on the
suction and discharge sides.
Vacuum cleaner heats
up
Slight heating of the vacuum cleaner is normal and cannot be considered a failure.
SUPPLEMENTAL ACCESSORIES
The following appliance accessories can be supplemented by purchase:
Fabric dust retention bag, 1 piece
Order code ts9170
Priced by the pricelist in force
Motor filter
Order code 44290880
Priced by the pricelist in force
Air outlet filter
Order code 44290881
Priced by the pricelist in force
(Fig. 5)
