48
VP4360 / VP4370 / VP4380
EN
CHECKING THE FULLNESS OF DUST CONTAINER
If the suction power of the vacuum cleaner is reduced or the dust container is full, empty it and clean the vacuum cleaner
filter.
MAINTENANCE
It is recommended to empty the dust container and clean the vacuum cleaner filters after each use of the vacuum
cleaner.
EMPTYING THE DUST CONTAINER
1. Disconnect the charger from the mains.
2. Hold the vacuum cleaner down with a dust container.
3. Press the latch to release the dust container.
4. Remove the filter holder and empty the vacuum cleaner dust container.
5. Reverse the procedure to attach the filter holder and the filter and put the dust container back.
CLEANING AND REPLACING THE PERMANENT FILTER
The vacuum cleaner filter can be cleaned by mechanical tapping and cleaning with a soft brush. A much soiled filter
can be washed after this step and cleaned with a soft brush in lukewarm water without detergents.
It is important to let the wet parts dry thoroughly. A wet filter would be depleted by vacuuming!
Do not use a hair dryer for drying!
Note: Wet cleaning can cause more wear on the filter and thereby shortening its life.
•
The filter should be cleaned or replaced with visible soiling or when the suction power of the vacuum cleaner drops.
Check it after each use of the vacuum cleaner.
•
To avoid damaging the vacuum cleaner, do not use it without a properly fitted filter and filter holder.
•
You can purchase a suitable filter type from your dealer or order from the manufacturer.
CLEANING AND MAINTENANCE
Accessories and vacuum cleaner can be cleaned with a damp cloth.
Do not immerse the power cord or the charger in water or any other liquid.
Do not use aggressive substances such as solvents or abrasives for cleaning!
