56
57
EN
EN
VP4165
VP4165
Hand-held vacuum cleaner
15
On/Off button
16
Battery/charge indicator
17
Dust cup release button
18
LED indicator
19
Sealing ring
20
HEPA filter
21
External filter
22
Dust cup
23
Nozzle with a brush
24
Slot nozzle
25
Flexible hose reducer
26
Flexible hose
ASSEMBLING THE APPLIANCE
Folding handle
To fold the handle, press the fold the handle button. When lifting the
handle vertically, it will automatically lock into the correct position.
Assembling the charging base
The charging base must be placed on a flat surface, using screws
and wall plugs it can be attached to the wall. The assemble the
base, slide the upper part into the base.
Place the screws and wall plugs on the underside of the charging
base. Drill holes into the wall and insert the wall plugs into the
holes. Then, fasten the charging base with the screws.
16
20
22
21
19
17
15
18
23
24
26
25
Off
Press
Holes for wall
mounting
Removable turbo nozzle
Turbo nozzle release
button
LED light
CHARGING THE APPLIANCE
1.
Insert the hand-held vacuum cleaner into the rod vacuum cleaner.
Ensure that the rod vacuum cleaner is off.
2.
Place the rod vacuum cleaner into the charging base.
Ensure that the charging base is placed on a level and stable
surface. Make sure there is no dust between the hand-held vacuum cleaner and the rod vacuum cleaner. If necessary,
clean the contacts.
3.
Plug the power cord into the socket.
The charging indicator lights up red, indicating that the vacuum cleaner is
charging. When charging, it is normal for the vacuum cleaner or the charging base to heat up.
Note: Even if the rod vacuum cleaner is on, if it is placed in the charging base, it automatically shuts off. While the rod
vacuum cleaner is charging, the vacuum cleaner has a current protection element. Even if you press the power button,
the appliance will remain switched off.
LED indicator
Adaptor slot