Concept2 VP 508x, Руководство пользователя

Страница: 35 / 64

EN
35 VP 508x
38 VP5060
EN
PRODUCT DESCRIPTION
1. Hose holder
2. Telescopic tube
3. Floor attachment
4. Flexible hose
5. Carry holder and power cord winding button
6. Switch button and power regulator
7. Container with cyclone unit
8. Container release latches
9. Container content level indicator
10. Air discharge filter
• Never use the vacuum cleaner without filters. Before each use, make sure that the filters of the vacuum cleaner are
installed properly.
• Do not immerse the power cord, plug, or appliance in water or any other liquid.
• Check the appliance and power cord for damage regularly. Do not switch on a damaged unit.
• Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool before cleaning and after use.
• Prior to vacuuming, it is necessary to remove large or sharp objects that could damage the dust filter from the surface to
be cleaned.
• Do not use the product if the filters are fouled.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
Accessories
А
Slotted nozzle
B
Nozzle with a brush
C Upholstery nozzle
7
2
8
3
1
6
4
5
10
9
A
C
B
39 VP5060
EN
ACCESSORIES
A. Slotted nozzle
The combined slotted adapter is designed for vacuuming areas with difficult access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and so on.
B. Nozzle with a brush
This nozzle is designed for furniture, upholstery, books, lamps, and so on.
C. Upholstery nozzle
This nozzle is used to clean smaller upholstered surfaces.
USING THE VACUUM CLEANER
NOTE
Prior to using the vacuum cleaner, please make sure that the filters have been installed properly. Unwind the necessary
length of the power cord and insert the plug into the mains outlet. The ideal length of the power cord is marked by a
yellow dot on the cord. Do not unwind the power cord past the red mark!
OPERATING INSTRUCTIONS
ASSEMBLING THE VACUUM CLEANER
NOTE:
Always disconnect the plug from the mains outlet prior to mounting or removing
accessories!
1. Connecting the flexible hose to the vacuum cleaner
Insert the flexible hose into the air suction inlet of the vacuum cleaner.
Continue pushing until you hear a clicking sound, which indicates that the correct
position has been reached. (Figure 1).
To remove the flexible hose, push the safety button and remove the hose.
The suction power can be controlled on the hose handle.
Slide controller in the closed position – stronger air flow.
Slide controller in the open position – weaker air flow.
2. Attaching the telescopic tube to the hose adapter
Place the telescopic tube on the hose adapter and turn slightly.
3. Extending the telescopic tube
Press the plastic latch and extend the smaller tube outwards.
4. Putting the floor attachment on the telescopic tube
Insert the telescopic tube into the floor nozzle and turn slightly.
The flap (Fig. 2) allows setting the floor attachment to brushing (for flat floors) or to
smooth vacuuming (for carpets).
(Fig. 1)
(Fig. 2)
(Fig. 1)
(Fig. 2)
A. Slotted nozzle
The combined slotted adapter is designed for vacuuming areas with difficult access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and so on.
B. Upholstery nozzle
This nozzle is used to clean smaller upholstered surfaces.
C. Nozzle for wooden fl oors