OPERATING INSTRUCTIONS
ASSEMBLING THE VACUUM CLEANER
N OT E:
Always disconnect the plug of the charging adapter from the mains outlet prior to mounting or removing
accessories!
1.
Inserting the portable part of the vacuum cleaner
Insert the nozzle of the portable part into the stick part of the vacuum cleaner and push the portable
part holder until you hear a clicking sound – which indicates that the correct position has been reached
(Fig. 1). To release the portable part press releasing button on the stick part of the vacuum cleaner
simultaneously.
2.
Erecting the holder of the vacuum cleaner stick part
Tilt out the holder of the vacuum cleaner stick part until you hear a clicking sound – which indicates that
the correct position has been reached (Fig. 2).
To fold press the releasing button on the holder of the vacuum cleaner stick part.
3.
Mounting the turbo brush
Put the turbo brush on the lower end of the vacuum cleaner stick part until you hear a clicking sound –
which indicates that the correct position has been reached (Fig. 3).
To dismount the turbo brush press the releasing button on the lower end of the vacuum cleaner stick
part.
Fig. 3
CHARGING THE ACCUMULATOR
Prior to the first use or if the accumulator of the vacuum cleaner is fully discharged, let the vacuum cleaner
charge for approximately 4 hours.
Connect the power cord and plug the charging adapter into the wall outlet.
If you want to keep the service life of the accumulator as long as possible, charge it only after it has been
discharged completely.
The service life of the accumulator is approximately 300 charging cycles.
Note: The indicator light will flash once the device has made contact with the adaptor. The light will stay on
once it is full charged.
EN
39
VP 411
5
Fig
. 1
F
ig
. 2
