Concept2 OPP1050, Руководство пользователя

Страница: 44 / 52

44
EN
OPP1050
Cleaning and replacement of filters
Textile grease filter
•
This filter cannot be washed or otherwise cleaned.
• During normal use of the appliance, the textile grease filter should
be replaced every 2-3 months. Shorten this interval if you fry or fry
more often.
•
Do not use the appliance without the textile grease filter properly
fitted!
1. Remove the lower metal cover of the appliance by sliding the
plastic catches (Fig. 1).
2. Loosen the wire holder filtr and discard the used textile grease filtr.
3. Fit a new textile grease filter and secure it with the wire holder
(Fig. 2).
4. Attach the bottom metal cover of the appliance in the reverse
order.
Carbon filter (to be purchased)
This filter is only used in recirculation mode. The filter contains activated carbon, which absorbs odors. After some time,
the activated carbon saturates and loses its absorption function. This filter cannot be washed or otherwise cleaned.
During normal use of the appliance, the carbon filter should be replaced every 2 months. Shorten this interval if you
fry or fry more often.
1.
Remove the lower metal cover of the appliance by sliding the plastic catches (Fig. 1).
2. Loosen the wire filter holder and discard the used carbon filter.
3. Install a new carbon filter and secure it with the wire filter holder.
4. In the engine compartment, "flip" the lever to recirculation mode (Fig. 3).
5. Proceed in the opposite way to replace the carbon filter.
Engine
Paw
Engine
Paw
Fig. 3
Fig. 1
Fig. 2