67
EN
OPO4590ss
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before first use.
2. Mark the position of the centre of the cooking hob on the ceiling above the hob (Figure 3). Prior to installation itself,
ensure there will be enough space vertically between the hood and the cooker hob, when the hood will be hanging
in its place (at least 550 mm from the electric hob or 650 mm from the gas hob), (Figure 4).
3. Mark and drill the holes for mounting the cooker hood holder for attaching on the ceiling (Figure 4 and Figure 5).
4. Use wall dowels and screws to fasten the holder to the drilled holes in the ceiling (Figure 6 and Figure 7).
5. When the hood is attached, install the flexible outlet duct to the outlet opening (Figure 8). Use a reducer fitting
150/120 mm in diameter, if required. Insert the other end of the flexible duct in the opening prepared in the ceiling.
6. Put the upper and lower chimney cover onto the mounted cooker hood holder (Figure 9).
7. Attach the upper chimney cover to the holder, but do not fully fasten the screws, leave them slightly loose so that
the lower chimney cover does not slide down and it can lean against the screws (Figure 10).
8. Attach the cooker hood body to the holder on the ceiling (Figure 11 and Figure 12).
9. Plug all the connectors into the distribution box.
10. Plug the power cord into the wall outlet. Fasten the screws on the upper chimney cover and lower the lower
chimney cover fully (Figure 13).
Y
X
550 mm
650 mm
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Содержание OPO4590ss
