EN
24
OPK 4360, OPK 4390
APPLIANCE DESCRIPTION
A Upper chimney cover
B Lower chimney cover
C Appliance body
D Appliance wall holder
E Upper chimney cover wall holder
F Upper cover
Accessories
1. Clack valve
1
CONTROL PANEL DESCRIPTION
1. Fan power adjustment buttons
2. Power level adjustment display, or delayed
turn-off times
3. Delayed turn-off set-up button
4. Lighting ON/OFF button
1
2
3
4
• For taking away the exhausted air, all the applicable standards and regulations must be observed.
• In the airing mode, the diameter of the exhaust piping should be approximately the same as that of the absorber
output piping.
• The air must not be exhausted through a chimney used for combustion gases, or in a shaft used for airing the
rooms where combustion chambers are installed.
• During operation in the airing mode, a suffi
cient opening for the inlet air must be provided; its size must be
approximately the same as or bigger than that of the hole for the exhausted air.
• During simultaneous operation of the appliance in the airing mode and of the stove, the under-pressure in the
room must not exceed 4 Pa (0.04 mbar).
• Do not use any other accessories than those recommended by the manufacturer.
Children in the household
• Do not allow children or irresponsible people to handle the appliance. Use the appliance out of the reach of these
persons.
• Handicapped persons, persons with impaired sensation, mental capabilities, or persons not familiar with the
appliance operation are only allowed to use it when supervised by responsible knowledgeable persons.
• Take extra care when using the appliance near children.
• Do not allow the appliance to be used as a toy.
