Concept2 MNV8060ds, Руководство пользователя

Страница: 172 / 186

172
EN
MNV8060ds
Note:
1. 1. In the upper part of the illustration for the installation of the top plate it is shown how many spacer bars and
which screws must be used for installing the spacer bars to the control panel of the dishwasher.
2. The spacer bars are put together; the side without the „pins“ shall be attached to the bottom side of the
dishwasher control panel.
3. The „pins“ on the bottom side of the bars must be removed (cut off). This step must be done otherwise the top
plate would not fit properly.
4. After removing the „pins“, attach the spacer bars with the included screws to the bottom side of the dishwasher
control panel.
5. In the upper part of the illustration for the installation of the top plate it is shown which screws must be used for
the number of spacer bars.
6. After attaching the spacer bars to the bottom side of the dishwasher control panel, the head of the screw must
be at the same level (it must not stick out) as the bottom side of the spacer bar.
Fig. 14
Unscrewing the short screws Screwing the
long screws
Magical paster
Magical paster
Fig. 14a
Fig. 14b