Concept2 MNV8060ds, Руководство пользователя

Страница: 159 / 186

159
EN
MNV8060ds
MAX
6
1
5
2
4
3
If the indicator of the amount of the rinse aid lights up, you must refill the dispenser before starting a new washing
cycle! The amount of the rinse aid can be checked visually according to C indicator, which is located next to the rinse
aid dispenser. If there is enough of the rinse aid in the dispenser the window is black. The size of the black dot in the
window depends on the amount of rinse aid in the dispenser. If the window is clear, the dispenser is empty. The level
of the rinse aid should not drop below ¼.
Note:
• The rinse aid dispenser is located on the door next to the detergent dispenser.
• The appliance is designed to be used only with liquid rinse aids.
• If there is a spillage of the rinse aid, wipe it out using an absorbent cloth or run a short washing cycle to wash it
away.
Caution!
• Use only rinse aids designed for use in dishwashers. Never pour detergents into the rinse aid dispenser.
• Load the rinse aid before running the short washing cycle to wash away any spilled rinse aid residues and
prevent the risk of corrosion of the appliance interior.
Setting the dosage of the rinse aid
• Dosage of the rinse aid can be set in positions from 1 to 6. Before first use, set the dosage to position 4.
• If water stains remain on the dishes, increase the dosage of the rinse aid.
• If a sticky film remains on the dishes, decrease the dosage of the rinse aid.
1. Open the appliance door.
2. Open the rinse aid dispenser as shown in Fig.3.
3. Increase/decrease the dosage of the rinse aid as needed.
4. After filling close the rinse aid dispenser cover and tighten it (Fig. 5).
If you only use a detergent with the integrated rinse aid, decrease the dosage of the rinse aid to minimum.
C (rinse aid level indicator)
Full
¾ Full
½ Full
¼ Full
Empty
Dosage
setting