Concept2 MNV8060ds, Руководство пользователя

Страница: 169 / 186

169
EN
MNV8060ds
Cleaning the spray arms
It is necessary to clean the spray arms regularly. Calcium and dirt may block nozzles and bearings of the spray arms.
Cleaning the control panel and the surface of appliance
• Use only a soft damp cloth for cleaning.
• Do not use rough and sharp objects (e.g. steel wool) or aggressive detergents.
• Do not allow water to come in contact with the door lock of the appliance.
• To clean the control panel do not use a spray cleaner. It may cause damage to the door lock and electrical parts of
the appliance.
• Some paper towels can scratch the stainless steel of the control panel.
1. To remove the upper spray arm, hold the nut in the centre and rotate the spray arm clockwise to remove it.
2. To remove the lower spray arm, pull it upwards.
3. Wash the spray arms with soap and warm water and clean the nozzles with a soft brush. After thorough rinsing,
put them back.
CAUTION!
One of the most common malfunctions is clogged spray arms. The filter is not properly inserted. Make sure the filter
system is locked properly after cleaning!
Properly secured filter Poorly secured filter Poorly secured filter