80
MNV4560
EN
Fig. 19
Connecting to the mains
• Make sure the mains voltage corresponds to the values on the rating plate.
• Only use grounded electric sockets.
• Never use adapter sockets, connectors and extension cords. They might create a risk of fire due to overheating.
• The dishwasher supply cord plug must remain freely accessible after the dishwasher is installed.
• Only a qualified specialist may perform any changes in connection.
DISHWASHER INSTALLATION
When installing the dishwasher, follow these instructions:
1. Check the dishwasher after delivery.
Note: All the dishwasher functions have been checked thoroughly during
manufacture. Small water stains may be left after these tests. They will disappear
after the first washing.
2. Fix the cover plate on the dishwasher door.
3. Adjust the door lifting spring strength.
4. Connect the water supply hose to the water mains.
5. Connect the drain hose to the water sink.
6. Connect the dishwater to the mains.
7. Fix the condensation strip to the plate bottom following the instructions on the
condensation strip backside. Dampness will condense on it, and the wooden
desk will thus be protected.
8. Push the dishwasher into the selected place in the cupboard.
9. Level the dishwasher horizontally by adjusting the feet. In the centre of the
lower side front section, there is a screw allowing adjustment of the back height.
Check the horizontal position using a level.
10. Make sure the dishwasher is secured in the cupboard against displacement by
fixing sheet metal plates and wood screws fixed to the upper board or/and to
the side board of the corpus.
Demounting
When demounting the dishwasher, it is important to proceed in the correct sequence of operations:
1. First, disconnect the dishwasher from the mains (pull out the plug).
2. Close the water supply.
3. Loosen the water drain and inlet hoses.
4. Loosen the fixing screws.
5. Demount the plate base when used with the dishwasher.
6. Pull out the dishwasher and in doing so pull out carefully also the water drain and supply hoses, and the supply cord.