78
MNV4560
EN
Fig. 13
Fig. 14
Fig. 16
Fig. 15
Dimensions and cover plate fixture to door
Figure 13 shows the required dimensions and placing of the holes on the dishwasher‘s door cover plate.
Fix the holder to the cover plate so that the
holder‘s fixing bolts have sunken heads not
protruding from the cover plate back side.
Mount swivels in holes with a min. diameter of
2 mm (Figure 14) and slide the whole assembly
onto the dishwasher door (Figure 15).
Door lifting spring strength adjustment
The door cover plate weight depends on the
material used. The spring strength can be
adjusted by turning the screws (Figure 16) on
the front side so that the door holds in the
open position, and closes smoothly when
lifted.
Upper hinge
Lower hinge
Cover plate
Outer door cover
