Concept2 MNV4160, Руководство пользователя

Страница: 141 / 170

141
EN
MNV4160
Setting the appliance according to the water hardness
1. Press the power button (1) to turn the appliance on.
2. Press the Start/Pause button (6) for more than 5 seconds, within 60 seconds after switching on the appliance, to
start the water softening setting.
3. Press the Start/Pause button (6) again to select the correct setting according to your area, the setting will switch
in the following order: H1-> H2-> H3-> H4-> H5-> H6.
4. Press the power button (1) to confirm the setting.
Water-hardness
Value (combination
lights)
Salt
consumption
(g/washing cycle)
°dH °fH °Clarke mmol/l
0~5 0~9 0~6 0~0,94 H1 (Rapid) 0
6–11 10–20 7–14 1.0–2.0 H2 (90 min) 9
12–17 21–30 15–21 2.1–3.0 H3 (90 min, Rapid) 12
18–22 31–40 22–28 3.1–4.0 H4 (ECO) 20
23–24 41–60 29–42 4.1–6.0 H5 (Rapid, ECO) 30
35–55 61–98 43–69 6.1–9.8 H6 (90 min, ECO) 60
Note:
• This appliance is factory preset to H3.
• It is possible to set the water softener within 60 seconds from turning the appliance on.
1°dH = 1.25°Clarke = 1.78°fH = 0.178 mmol/l
°dH
German degrees
°fH French degrees
°Clark British degrees