Concept2 MNV4160, Руководство пользователя

Страница: 140 / 170

140
EN
MNV4160
Status indicator (Lights polishes complement, supplement regeneration salt)
• If the indicator status (7) LED lights up, it is needed to add the appropriate detergents.
Symbol Status indicator
Rinse aid
Salt
Symbol Mycí program
Intensive
Heavily dirty dishes including pots and pans. Dried food residue.
Normal
For normally dirty dishes such as pots, plates, glasses and slightly dirty pans.
ECO
This is a standard program suitable for normally dirty dishes such as pots, plates, glasses
and slightly dirty pans.
Glass
For lightly dirty dishes and glassware.
90 Min
For normally dirty dishes that do not require long washing.
Rapid
Shorter washing for slightly dirty dishes that do not need drying.
USER‘S MANUAL
Before first use
9. Set the appliance according to hardness of the water (see below).
10. Pour the regenerating salt into the salt container.
11. Pour the rinse aid into the rinse aid dispenser.
12. Pour the detergent or put the tablet into the detergent dispenser.
Water softeners
Soft water is required for efficient washing (water with low calcium content), otherwise limescale is created on the
dishes and in the interior of the dishwasher. Tap water which exceeds the given level of water hardness must be
softened before being used for washing purposes (meaning free of calcium). This is achieved by regenerating salt in the
softening unit of the dishwasher. Setting the unit and the required amount of salt depend on the hardness of tap water.
Water hardness is measured in equivalent degrees of hardness, German degrees °dH, French degrees °fH, British
degrees °Clarke and mmol/l (millimoles per litre - international unit for the hardness of water).
The softening unit should be set according to the hardness of the water used for the appliance. Contact your local
water utility company for information about the water hardness in your area. Set the dosage regulator manually
according to the table.