81
MNV3060
EN
INSTALLATION AND ASSEMBLY OF THE DISHWASHER
General
Based and integrable dishwashers installed additionally as free-standing appliances must be protected from
overturning. They should, for example, be screwed to a wall, or placed under a compact worktop fixed to
cupboards.
The dishwasher has to be expertly connected to assure proper operation. The data for the water input and
output and electric parameters shall correspond to the data mentioned in the technical parameters or assembly
instructions.
Preparations for installation
For built-in version dimensions, see Fig. 16. Leave a minimum space around the open door of 50 mm.
• Do not use rough tools or hand-washing sponges. They could scratch the surface. Use a wet cloth soaked in water
with a detergent.
• If you are leaving your apartment for a longer period of time, run a washing program with an empty washing
tub; after completion, disconnect the power supply cable, close the water tap and leave the door slightly open to
prevent dampness and smell from accumulating inside. An open door also prolongs the life of the sealing.
• If you need to move the unit, keep it in a vertical position. If this is impossible, turn and move it along the
backside.
• One of the sources of smell is dirt around individual seals. Check them and wipe with a wet cloth if necessary.
Space for power and
water supply and
water discharge
Space under
cupboard
Fig. 16
