80
MNV3060
EN
2 Spray arms
Calcium and dirt from the washing water can block the jets and bearings of the spray arms.
• Check the output jets of the spray arms for food remnants.
• If necessary, unscrew and remove the arms (Fig. 15). Rinse them under running water and reinstall them.
Cleaning the control panel and surface of the dishwasher
Use a soft, wet cloth. Do not use rough or sharp objects or aggressive detergents.
Protect the door lock from water.
Protection from freezing
If you are not going to use the dishwasher for a long period of time, or you are going to store it in a place with a low
temperature, you should proceed as follows:
1. Disconnect the dishwasher from the power outlet.
2. Disconnect the dishwasher from the water supply.
3. Dismantle the supply hose and pour out the water. You may use a shallow tray to collect the water.
4. Connect the supply hose back to the dishwasher.
5. Remove the filter system on the bottom, and dry the remaining water (with a sponge).
Some tips for maintenance
• Close the water supply after each use, and leave the door slightly open to prevent dampness and smell from
accumulating inside.
• Disconnect the power cable from the wall outlet before cleaning and maintenance.
Fig. 15
