70
MNV3060
EN
1
8
4
5 6 7
3
2
OPERATING INSTRUCTIONS
For the first washing, buy
• regeneration salt (according to the water hardness – see below)
• dishwasher detergent
• rinse aid
Use only products designed for dishwashers.
Water softening device
Soft water is needed for effective washing, i.e. water with a low calcium content; otherwise, limescale is created
on the dishes and inside the unit. Water from the mains that exceeds the given hardness level shall be softened
for use, i.e. decalcified. This is done by the regeneration salt in the softening device. The settings and necessary
volume of salt depend on the tap water hardness.
Water hardness is marked in equivalent levels, German °dH, French °TH and mmol/l (milimol per liter – international
water hardness unit).
The softener should be set according to the hardness of the local water. You may obtain the information on the
local water hardness from your local water utilities provider. Set the regulator inside the water softener container
according to the following table (Fig. 1).
DESCRIPTION OF THE CONTROL PANEL
5. Delayed ON button (up to 24 hours)
6. Washing program selection button
7. Button to RUN/SUSPEND the running program
8. Display
1. Main switch button
2. Language switch button
3. Alternative washing button (both spray arms,
upper arm only, lower arm only)
4. 3 in 1 function button
Water Softening Device Settings
Water hardness
Softener
position
Salt consumption
(g/washing cycle)
°dH
°TH
mmol/l
0 - 8
0 - 14
0 – 1.4
Any
No salt
8 - 22
14 - 39
1.4 – 3.9
-
20
22 - 45
39 - 80
3.9 - 8
Medium
40
>45
>80
>8
+
60
Fig. 1
