Concept2 LK5455ss, Руководство пользователя

Страница: 65 / 76

65
EN
LK5455wh / LK5455ss
Display
The display lights for 3 seconds, when the appliance is connected to the mains. After that, a beep sound occurs and the
display switches splayed in operation mode. In operation mode, the actual set temperature of each zone is displayed.
Default temperatures for the individual zone are pre-set at 5 °C / -18 °C.
If an error occurs, the error code will be shown on the display. If the door does not get open opened and any other
activity is not done within 30 seconds, the control panel gets locked. After the first start, the display shows the
temperatures for the individual zones of the refrigerator as determined by the factory setting of the unit, i.e. 5 °C in
the refrigerator and -18 °C in the freezer.
TIPS FOR USE
Refrigerator
•
Cooked food should not be placed in the refrigerator until it is at room temperature.
• We do not recommend putting hot food or fluids that are still evaporating inside the refrigerator. It will increase the
humidity inside the refrigerator.
• Food intended for refrigerating should be wrapped or covered. It is recommended to use plastic bags, kitchen foil
or food paper to wrap food. Liquids should be stored in closed containers or bottles.
•
You can also move the multifunctional drawer (5) under the second glass shelf (3) as required. Thus, in the lower
part of the refrigerator, a multifunctional space is created, for example for storing drinks.
• The lower position of the multifunctional drawer is more suitable for short-term storage of meat and eggs, in this
position the temperature in the drawer is lower and more stable.
Freezer
• Before placing the food in the freezer, it is advisable to cut it into smaller portions stored in separate containers for
easier removal from the freezer after freezing.
• Pizza box (6) is intended for storing pizza, ice cream, etc.
•
In case you need to store bulkier food in the freezer, you can remove the Pizza box, turn it upside down and put it
back in this position. You get more space above the first freezer drawer.
• It is also not recommended to put beverages in glass bottles in the freezer, glass can easily rupture due to low
temperatures inside the freezer.
USER MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons. Wash
all removable parts with warm soapy water.
After installing the refrigerator, leave the appliance standstill for at least 2 hours before connecting to the mains. It is
necessary to allow the cooling gases to set down. Then you can connect the refrigerator to the mains and let it run for
2-3 hours to stabilize a normal operating temperature. Then put fresh or frozen food inside the appliance.
Note : If a power failure occurs during the first run, wait for at least 5 minutes before switching on again or connecting
to the mains.
Setting the Temperature of Refrigerator Zone
• Press the temperature setting sensor button (7) for 3 seconds to select the temperature inside the refrigerator.
• Each time you press the sensor button (7), you move to the next pre-set temperature.
•
The corresponding temperature remains flashing for another 3 seconds, then the selection is saved automatically.
• The temperature of the refrigerator zone can be set between 2 and 8 °C.