Follow the installation instructions below:
1. Remove all the packaging and marketing materials from the unit before the first use.
2. For the sake of efficient air circulation the unit has to be located according to the dimensions on Fig. 5
and the design of the cabinet must enable air flow into its bottom part. The gap behind the rear wall of
the built-in appliance must be at least 50 mm.
3. Put the unit on the edge of the cabinet and run the power cord through the rear wall of the cabinet so
that its plug is accessible after installation.
4. Push the unit carefully to the selected place in the cabinet. Be careful not to squeeze the power cord.
5. Attach the unit to the cabinet by screwing two screws in the holes in the front wall of the cabinet. The
holes can be seen after opening the door.
6. Plug the supply cable into the wall outlet.
Removal
To uninstall the appliance, it is important to proceed correctly:
1. First, unplug the power cord from the mains (pull out the plug or switch off the circuit breaker).
2. Remove the attachment screws.
3. Slide out the appliance and at the same time pull out the power cord carefully.
EN
76
ETV7360
Содержание ETV7360
Страница 2: ......
