Concept2 ETV5160, Руководство пользователя

Страница: 45 / 60

43 ETV5160
EN
Connection in the mains
t .BLFTVSFUIFNBJOTWPMUBHFBOEDVSSFOUQSPUFDUJPODPSSFTQPOEUPUIFWBMVFTPOUIFSBUJOHQMBUF8FSFDPNNFOE
using a separate outlet circuit with a 16A circuit breaker.
t 6TFHSPVOEFEXBMMPVUMFUTPOMZ
t %POPUVTFBEBQUFSQMVHTDPOOFDUPSTPSFYUFOTJPODBCMFT5IFZDPVMEJNQMZBSJTLPGGJSFGSPNPWFSIFBUJOH
t 5IFTVQQMZDBCMFQMVHIBTUPCFGSFFMZBDDFTTJCMFFWFOBGUFSUIFJOTUBMMBUJPOPGUIFVOJU
t 0OMZBRVBMJGJFEFYQFSUDBOQFSGPSNDPOOFDUJPODIBOHFT
t &MFDUSJDBMTBGFUZPGUIFVOJUDBOPOMZCFHVBSBOUFFEJGUIFQSPUFDUJWFUFSNJOBMPGUIFVOJUJTDPOOFDUFEXJUIUIF
protective conductor of the mains.
t 5IFNBOVGBDUVSFSCFBSTOPSFTQPOTJCJMJUZGPSEBNBHFTDBVTFEUPQFPQMFPSUIJOHTBTBSFTVMUPGNJTTJOHPSCBE
protective connection.
t 5IFQPXFSDPSENVTUCFMPDBUFETPUIBUJUEPFTOPUDPNFJOUPDPOUBDUXJUIIPUQBSUTPGUIFVOJUBOETPUIBUJUJT
not deformed and excessively bent.
When installing the unit, follow these instructions:
1. Remove all the packaging and marketing materials from the unit before the first use.
'PSUIFSFRVJSFECVJMUJOCPYEJNFOTJPOTTFF'JH'PSUIFTBLFPGFGGJDJFOUBJSDJSDVMBUJPOUIFVOJUIBTUPCF
located according to the dimensions on the pictures and the design of the cabinet must enable air flow into its
bottom part. The gap behind the rear wall of the built-in oven must be at least 50 mm.
3. Put the unit on the edge of the cabinet and run the power cord through the rear wall of the cabinet so that its
plug is accessible after installation.
1VTIUIFVOJUDBSFGVMMZUPUIFTFMFDUFEQMBDFJOUIFDBCJOFU#FDBSFGVMOPUUPTRVFF[FUIFQPXFSDPSE
5. Attach the unit to the cabinet by screwing four screws in the holes in the front wall. The holes can be seen after
opening of the door (see Fig. 6).
6. Plug the supply cable in the wall outlet.
Fig. 4
Fig. 5
43 ETV5160
EN