Concept2 ETV 6960 bc, Руководство пользователя

Страница: 48 / 64

CLEANING AND MAINTENANCE
For the sake of good appearance and reliability, keep the unit clean.
The modern design of the unit facilitates the maintenance to the minimum.
The parts of the unit which come into contact with food have to be cleaned regularly.
• Before any maintenance and cleaning disconnect the power cord from the mains or switch off the circuit breaker of
the mains outlet of the unit.
• Set all controls in the OFF position.
• Wait until the inside of the unit is not hot anymore but remains lukewarm - cleaning is easier than when it is cold.
• Clean the outer surface of the unit with a damp cloth, soft brush or fi ne sponge and then wipe it dry.
• The bottom and ceiling of the oven can be wiped with a damp cloth, soft brush or sponge. In cases of heavy soiling,
use hot water with non-aggressive detergent.
• For cleaning the glass of the oven door do not use coarse abrasive cleaners or sharp metal scrapers, since they can
scratch the surface or the glass can be broken.
• Never leave aggressive or acidic substances (lemon juice, vinegar) on the enamelled, varnished or stainless parts.
• Do not use autoclave for cleaning the unit!
• The baking pans may be washed in a dishwasher.
UNIT INSTALLATION
• Only the customer is responsible for installation in
situ. Defects caused by incorrect installation are not
covered by the warranty.
• Do not lift the unit by holding it by the handle of
the door!
• WARNING! Some edges of the unit that are hidden
after the installation can be sharp! Proceed with
caution to prevent an injury!
• The manufacturer bears no responsibility for dam-
age caused to people, animals or objects as a result
of incorrect installation.
• To ensure the correct function of the unit, place it
in suitable furniture.
• The unit should be installed in standardised kitchen furniture designed for built-in appliances or in properly adapted
furniture of dimensions according to Fig. 7a, 7b.
• The kitchen furniture must be made of suffi ciently heat-resistant material. The materials and adhesives used must be
resistant to heating of the unit according to standard ČSN EN 60335-2-6. Materials and adhesives that do not meet
the stated standard may deform or loosen.
Connecting to the mains
• Make sure the mains voltage and current protection correspond to the values on the rating plate. We recommend
using a separate outlet circuit with a 16A circuit breaker.
• Use grounded wall outlets only.
• Do not use adapter plugs, connectors or extension cables. They could create a risk of fi re due to overheating.
• The supply cable plug or circuit breaker have to be freely accessible even after the installation of the unit.
• Only a qualifi ed expert can perform connection changes.
Fig. 7b
46 ETV 6960 bc
EN