DIP SWITCH SETTINGS
Dip switch setting control the following functions:
Duration of Sound:
Dip 1, 2, 3, 4 30 / 60 / 120 / 240 / 480 seconds
Delay after Activation:
Dip 5, 6 1 / 3 / 6 seconds
Disable Sounder:
Dip 7 On = Disable Off = Operational
Test / Normal Mode:
Dip 8 On = Test Off = Operational
Note: Test mode enables the sounder to be tested without full tones and volume.
INSTALLATION AND TESTING
Remove end cap and mesh cover.
DISABLE SOUNDER
Switch Dip 7 to ON to prevent accidental activation.
MOUNT SOUNDER
Mount the S3B Sound Barrier in the desired location.
CONNECTIONS
Ensure the Battery Enable switch is OFF.
Make connections for the 12-volt external power supply.
Make connections for the alarm relay (normally closed opening in ‘Alarm’)
Make connections for Status Monitoring (optional).
SETTING THE SOUNDER TIMER
The S3B Sound Barrier will produce sound for a preset period. This can be from 30 seconds up to 8 minutes. The
timing is set using Dip switches 1 – 4.
Dip 1
Dip 2
Dip 3
Dip 4
Time
OFF
OFF
OFF
OFF
30 seconds
ON
OFF
OFF
OFF
60 seconds
OFF
ON
OFF
OFF
120 seconds
OFF
OFF
ON
OFF
240 seconds
OFF
OFF
OFF
ON
480 seconds
