Concept LED Lights Ltd
01553 617591 / 08711 339037 [email protected]
Mounting:
For either mounting on the floor or on the wall. The safety loop is used to attach a safety
cable. You must supply your own clamps and make sure the clamps are capable of
supporting the weight of this product. Before mounting the product, read and follow the safety
recommendations indicated in the Safety Notes
Mounting Guidelines
:
We recommends using the following guidelines when mounting this
product:
· Before deciding on a location, always make sure there is easy access to the bar for
maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the bar can support the
product
’s weight (see the
Technical Specifications
).
· When mounting the product overhead, always use a safety cable. Mount the bar securely to
a rigging point, such as an elevated platform or a truss.
· When rigging the bar onto a truss, you should use a mounting clamp of appropriate weight
capacity.
· The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage
the knobs.
· When mounting the bar on the floor, make sure that the product and cables are away from
people and vehicles.
