Concept LED Lights Ltd
01553 617591 / 08711 339037 [email protected]
Safety Notes:
Read all the following Safety Notes before working with this product. These notes
include important information about the installation, usage, and maintenance of this product
This icon indicates critical installation, configuration, or operation information.
Failure to comply with this information may render the fixture partially or
completely inoperative, damage third-party equipment, or cause harm to the user
There are no user-serviceable parts in this product. Any reference to servicing
in this guide applies only to properly certified technicians. Do not open the housing or attempt
any repairs unless you are certified
This icon indicates useful, although non-critical information.
· Please refer to all applicable local codes and regulations for proper installation of this
product.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product
’s housing during operation because it may be very hot.
· Do not operate this product if you see damage on the housing, lenses, or mounting bracket.
Have any damaged parts replaced by a certified technician at once. In the unlikely event that
your product may require service, contact Concept LED Lights Ltd.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at a
higher temperature.
· In case of a serious operating problem, stop using this product immediately
