Concept LED Lights Ltd
01553 617591 / 08711 339037 [email protected]
Product Maintenance:
To maintain optimum performance and minimize wear, you should clean this product frequently. Usage
and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and
can cause overheating. This can lead to reduced light source life and increased mechanical wear.
Cleaning the
V-
PIX™ Quad Bar
:
1. Unplug the product.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents
and accessible internal components.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl alcohol.
5. Apply a solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
Wipe any dirt or grime to the outside edge of the surface. Gently polish the surfaces with the
lint-free cotton cloth or lens cleaning tissue until they are free of haze and lint. Always dry the external
surfaces carefully after cleaning them.
Expected LED Lifespan
:
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs
’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours.
If extending this lifespan is vital, lower the operating temperature by improving the ventilation
around the product and reducing the ambient temperature to an optimal operating range. In
addition, limiting the overall projection intensity may also help to extend the LED
’s lifespan.
