SC-5 SURE CUT Servo Knife Cutter
UGE059/1003
4-8
O
PERATION
Batch Select Area Screen
Under the batch counter, on the left is a soft key labeled
Change. Pressing this key displays the Select Batch Area
screen. Additional information on how to access this screen
can be found in the operator display overview in Appendix E
of this manual.
This screen provides access to the batch Preset/softkey1 or
batch Alarm/softkey3 areas. Pressing Exit/softkey2 returns the
display to the batch counter screen. If no selection is made
within 30 seconds the display returns to batch counter screen.
Batch Preset Screen
By pressing the soft key located under the word Batch on the
Batch Area Screen, the preset for the Batch counter is avail-
able.
The number shown is the current batch preset. A cursor will
appear in the least significant digit. The user has a choice of
ways to adjust this number.
Exit or Prev, If no change is required press Exit or Prev to
return to the Main screen.
Raise will increase the preset by 1. The key can be pressed
once for each increment required or held down to scroll up.
Releasing the key will freeze the preset at the last value.
Lower will decrease the preset by 1. The key can be pressed
once for each decrement required or held down to scroll
down. Releasing the key will freeze the preset at the last
value.
C
ONTROL
I
NSTRUCTIONS
B
ATCH
S
CREEN
C
ONTINUED
SELECT BATCH AREA
Preset
Exit
Alarm
PRESET 000,000 pcs
Exit
Continued
