background image

3.  Using the other hand, turn the locking cover tab and push the 

attachment away from the handle. Grab the ribbed surface on 
the side of the attachment and pull off.

4.  After use, reverse the process in step two.

Removeable  

Lint/Fabric Bristle 

& Soleplate cover

Crease  

Attachment

FOR UPRIGHT STEAMING
1.  Turn the variable temperature control dial to the High 3 dots (···) 

setting. The unit will take approximately two minutes to reach 
this temperature. When the temperature has been achieved, the 
green light will turn off.

2.  Holding the steam vents away from you and anyone else in the 

room, engage the trigger. Steam should now be released from 
the vents in the soleplate. 

The unit is equipped with a convenient trigger for continuous 
steam. To start flow of steam, press and hold trigger. Initial use 
may need 2-5 seconds to wait for steam to come out. Steam will 
emit until the trigger is released. Do not press the steam button 
for longer then 10 seconds; otherwise hot water may leak from 
the soleplate.
When you have finished using the unit, or are resting, be sure 
to elevate the soleplate. Please be sure to turn the variable 
temperature control dial to the “min” position. Unplug the unit 
and replace the soleplate cover for storage.

STEAMING TIPS
1.  To prepare your fabric for steaming, brush it with the (included) 

fabric brush. This will loosen the fibers and allow better steam 
penetration.

Содержание CGS19A













Отзывы: